Professional Level SuperYoyo Assembly Instructions
Follow these steps to setup your Aqua Dragon, Dragon Deluxe or Fire Dragon Superyoyos.

Step 1:
Identify the bearing (centre) and the two spacers. Note that the spacer has a inner raised edge on one side, which you can see it facing up from the photo below.


*Note the inner raised edge below


Step 2:
Slot the spacer through the axle with the inner raised edge facing up.


Step 3:
Slot the bearing next. There are no specific sides for the bearing as they are the same.


Step 4:
Slot the second spacer onto the bearing with the inner raised edge facing the bearing.


* This is how it should look after fitting the parts.


Step 5:
Screw the other yoyo half to the axel and be careful not to over tighten the yoyo.


Now go have fun with your professional Superyoyos! If you don't have it yet, you can get it from your favourite authorised Superyoyo retailers.


Steps for Changing Your String
Your yoyo string will wear out over days. A worn out string will decrease the yoyo's performance and it may break, posing a hazard to yourself and others. Remember to change your strings regularly to get the most out of your Superyoyo. You can tell the string has worn out if it has turn grey or dirty and has lose its elasticity. The humid weather here in Singapore causes it to wear out faster as well. Follow the steps below to replace the string on your superyoyo.

Step 1:
There are 2 ends to a string. One end has a loop to make a slip-knot for the finger. The tail end is for the yoyo. Pinch tail end with your left hand.




Step 2:
While your left hand is still pinching the tail end, twist the string open (counter-clockwise) with your right hand.


Step 3:
Twist it open wide enough for your left thumb and index finger to slip through.


Step 4:
Twist it further open so that it is wide enough for the yoyo to fit through.

Step 6:
Put the loop over the yoyo.


Step 7:
Put the string with your right hand to ensure both 'small' strings has equal tension and twist back clockwise to return the string to its original form.


Changing Your String for Super Advanced Yoyos
Super Advanced Yoyos such as Fire Star and Stealth Raider features an unique Auto-Return mechanism. An extra loop around the nylon axle is required for the yoyo to return to your hand automatically. Follow the steps below to replace your string.


Step 1:
Identify the end of the string that will be put around the yoyo.


Step 2:
Pinch the end of the string with your fingers.


Step 3:
While pinching the string, use your other hand to twist open the strings


Step 4:
Twist it open wide enough for the yoyo to fit in.




Step 5:
Put the yoyo in.




Step 6:
This is the important extra step that is required for this yoyo. Use your right hand and twist the string (or the yoyo) so you can see the string crossing as seen in the photo.


Step 7:
The cross should just be above the nylon axle. Flip the string down.




You should see an additional loop around the axle if you do it correct. Refer to photo below.


Done!